Hammer Fixings - Type HIF

  code:A211
Contact Us for Enquiries 01224 707 488

Nylon Hammer Fixings (Bright Zinc Plated Nail)

This ‘through’ fixing is ideal for quick efficient installation of all interior timberwork - battens, frames, wall linings, thermal board etc, into solid materials. The hammer-in screw eliminates the need to use a screwdriver and facilitates speedy installation. Can be removed with a No.2 pozi screwdriver. The 100% nylon plug is tough and resilient for long life.

They work in the following way: by hammering in the fixing, the drive nail pushes against the pre-expansion collar until the sleeve is fully located. Further hammering or tightening the screw causes the sleeve to expand. When point of contact is made in the hole the screw is drawn in towards the fixing until flush with the fixture surface.


Please contact us for Technical Spec

Please contact us regarding our Health & Safety

Product Code: Product Options: Length Diameter Quantity Enter Quantity
A211-430 Nylon Hammer Fixing, 8 x 60mm 60 8 100
A211-440 Nylon Hammer Fixing, 8 x 80mm 80 8 100
A211-450 Nylon Hammer Fixing, 8 x 100mm 100 8 100
A211-454 Nylon Hammer Fixing, 8 x 120mm 120 8 100
A211-458 Nylon Hammer Fixing, 8 x 140mm 140 8 100
A211-550 Nylon Hammer Fixing,10 x 100mm 100 10 100
A211-554 Nylon Hammer Fixing,10 x 120mm 120 10 100
A211-557 Nylon Hammer Fixing,10 x 140mm 140 10 100
A211-225 Nylon Hammer Fixing, 5 x 50mm 50 5 100
A211-215 Nylon Hammer Fixing, 5 x 30mm 30 5 100
A211-320 Nylon Hammer Fixing, 6 x 40mm 40 6 100
A211-330 Nylon Hammer Fixing, 6 x 60mm 60 6 100
A211-340 Nylon Hammer Fixing, 6 x 80mm 80 6 100
Add to Quote